EPDM Reclaim Rubber
“When you refuse to reuse, it’s our Earth, you say abuse.”
Production Process
At Sai Rubbers Company, we purchase and supply ethylene propylene diene monomer ( EPDM) Reclaim Rubber in the name of our brand SRC. Our working place is at Bakrol-Bujarang , Ahemdabad- the heritage city of India, Is known for its quality concern dealing of EPDM Reclaimed Rubber. Our products can be relied upon for use in a variety of verticals like automobile parts, tires, inner liners, hoses, sound dampers, adhesives, and a wide range of rubber-moulded goods. We purchase from our suppliers who follow the procedure ; the EPDM scrap is collected from a network of approved suppliers and is further segregated from foreign contamination to ensure only the EPDM material is taken for reclaiming. The entire process is divided into two phases.
The EPDM scrap is collected from a network of approved suppliers and is further segregated from foreign contamination to ensure only the EPDM material is taken for reclaiming. The entire process is divided into two phases. In the first phase, the scrap is passed through a number of stages to ensure that it is free of contaminants.
In second phase the material is depolymerized and filtered with screens from 60 to 100 Mesh for removing metal impurities through straining process and then further refined for crushing the rubber granules by the means of refining process with high quality rubber refiners to get the original depolymerized EPDM reclaim rubber at the end.
Applications
- Very fine grade reclaim rubber mainly used in extruted & molded products.
Source
- Factory rejects of microwave cured EPDM profile
EPDM Reclaim Rubber - Material Safety Data Sheet (MSDS)
Specifications
KEY GRADES | UNITS | STANDARDS | LIMITS |
---|---|---|---|
PHYSICAL PROPERTIES | |||
Mooney Viscosity | ML (1+4)@100C | ASTM D1646 | 35 ± 10 |
Hardness Shore A | Deg | ASTM D2240 | 55 ± 5 |
Tensile Strength | kg/cm2 | ASTM D412 | 60 min |
Elongation at Brake | % | ASTM D412 | 350 min |
Specific Gravity | gm/cc | ASTM D297-18 | 1.13 ± 0.03 |
CHEMICAL PROPERTIES | |||
Carbon Black | % | ASTM E 1131 | 20 min |
Ash Content | % | ASTM D297-18 | 20 max |
Acetone Extract | % | ASTM D297-18 | 35 Max |
Volatile Matter | % | 1 max | |
Polymer Content | % | ASTM E 1131 | 30 min |